Yong Jia Goole Valve Co.,Ltd

FT43 ball float steam trap Product: FT44 ball float steam trap Pressure Rating: 1.6-4.0Mpa Specification: DN25 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Details Product:FT44 Ball Float Steam Trap. Pressure Rating:1.6-4.0Mpa Specification:DN25 Material:cast steel Standard flanges:DIN,ANSI,JIS,JB79   Structural characteristic of FT44 ball float steam trap 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable close down and long life. 2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam. 3.No noise before operation in favor of environmental protection. 4.At the beginning of ventilation,all the valves start and low temperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment. 5.Internal component is made of stainless steel, corrosion and cavitation erosion proof. main technical parameters and indexes of performance  Nominal pressure PN16 Maximun design pressure(PMA) 16bar g Maximun design temperature(TMA) 300 Minimun design temperature(TMI) -10 Maximun upstream pressure for saturated steam service(PMO) 13bar g Maximun operating temperature(TMO) 300 Minimun operating temperature(TMIO) 0 Maximun differential pressure( PMX ) FT43-4.5 4.5bar FT43 -10 10bar FT43 -14 14bar Maximum cold hydraulic test pressure 24bar g material of main component  Name of component Material of component Valve body, valve cover WCB Floating ball stainless steel connecting dimension  DN A 25 160